Vibrating Feeder Overview
vibrating feederVibrating feeder is designed and built to withstand the toughest work in a quarry or mine by matching different applications; This vibrating feeder series is designed particularly for continuous use with any hard and abrasive materials through uniform flow. Vibrating feeder works to continuously and evenly feed lump, particle and powdered materials from hopper to belt conveyer, bucket elevator, screens and crushing machines, etc. Steeples regulation is available for SBM’s vibrating feeder to automatically and centrally control the feeding volume.
Vibrating Feeder Parts
Vibrating feeder consists of vibrating frame, spring, vibrator, motor vibrating device and motor. The vibrator is made of two fixed eccentric shafts whose gears are jogged. When installation, the two gears must be jogged according to the sign.
Vibrating Feeder Application
Vibrating Feeder can continuously and evenly send materials to crusher and roughly screen them. It matches crushing and screening machines in many areas such as metallurgical industry, coal mining, mining-selecting, building ,chemical and grinding industry, etc.
Vibrating Feeder Main Features and Benefits
  1. Our vibrating feeder is of highest capacity for the same deck size in industry.
  2. Sub-resonance tuning to guarantee efficient, continued operation as deck liners wear.
  3. Simple structure, easy to adjust and to maintain.
  4. Infinite variety of sizes and custom configurations, typically up to 600 t/h to suit your requirement.
  5. Our vibrating feeder is added closed frame, it can largely reduce pollution and noise.
Vibrating Feeder Working Principle
Through drive of the motor, the two eccentric shafts start rotating to produce a linear huge power which forces the feeder to vibrate. Through the vibration, The materials will slip and sling on the funnel, moving forward, when the materials pass the screening part, smaller parts will fall down, avoiding the further crushing, so screening purpose of vibrating feeder can be reached.
Vibrating Feeder Maintenance
Usually check the amplitude of vibration motors. Once discover the unusual circumstances, should be immediately shut down the vibrating feeder. This is because the vibration of the motor current and the temperature of surface required uniform, do not put so rocking.
    Motor bearings are the broken line in the mouth Feeder critical equipment, that is why its maintenance is also particularly important.In the normal case, fill oil every 2 months. In the high-temperature season, fill oil every month. The motor must be renewed every six month and also to replace the internal bearings.
Vibrating Feeder Specifications
Model Max input size(mm) capacity (t/h) motor power (kw) Installaition Slope weight (kg) Size of Funnel (mm)
GZD-180×80 300 30-80 2×1.5 0-10 0.8 1800×800
GZD-300×90 500 40-100 2×2.2 0-10 1.5 3000×900
ZSW-380×96 500 90-100 11 0° 3.98 3800×960
ZSW-490×96 500 120-240 15 0° 5.5 4900×960
ZSW-490×110 580 120-280 15 0° 5.72 4900×1100
ZSW-590×110 600 280-500 22 0° 6.13 5900×1100
ZSW-600×130 750 400-560 22 0° 7.8 6000×1300

Note: This specification is just reference, any changes are subject to the Vibrating Feeder products.